• Lidded Dump Body STANDARD ACCESSORY
• 1 Piece Food Cupboard
• 1 Piece Tool Box
• 40 litre water Cr tank.
• Fire Extinguisher Box
• Spare Tyre Room
• Collapsible Side Barrier
• 1 Piece Wood and Wood Room

CHASIS

Chasis is made of 52sheet iron, with Z traverse high strenghtened, welded using inert-gaz welding method, 1 cross-sectioned chassis.

AXLE

With 3*12 tones carry capacity, with authomatic brake adjust lever, optional trademark.

SUPENTION SYSTEM

It consists a lowering and lifting and height adjusting system; it has got a Z shield an amartissor element which limits the exceeding movements of the axle.

FRONT AXLE LIFTING

It is a front controlled tyre durable extension system.

BRAKE SYSTEM

Abs or ebs systems in convenient with the European standards; automatic brake ratchets; with alarm on the rear axle, and normal elbow brake on the other axles.Two changeable and protective brake sockets in front of the trailer.

TYRE AND TYRE RIM

6+1 tyres in size 385 / 65* r 22.5,and 6+1.tyre rims in size 1175 * 22,5 .

MECHANIC LEGS

Double speeded, springed mechanich feet, each with a capacity of carriying 24 ton.

KING PIN

With 2 flanged bolts.Durable against high stretched breaking, manufactured from wrought steel. Easy to uninstall by means of screw joints.

ELECTRIC SYSTEM

Socket with the appliance of EEC standards; plate enlightment at the back, reflector and rear stop lights.

LIFT

Safety lifting pressure minmum 150 bar, maximum 170 bar. 5700 5 stp. The second lift is optional.

DIRECTION CONTROL VALVE

It supplies the direction of the oil pressure in the cylinder and the return of it by pneumatic system semi-automatically.

LIMIT CONTROL VALVE

As a result of a sudden release, it prevents the damper to fall down as it is in open position. When the damper comes to the last opening limit, it limits the opening of the lift and it prevents the lift being forced.

ÇEKİCİ SEMİ-TREYLER HİDROLİK BAĞLANTISI

Çekici ile semi treyler arasındakıi hidrolik bağlantı (dönüş ve basınç) hortumları birbirine kolayca takılıp ayrilabilen soketlerle sağlanır.

HYDROLIC PUMP

Necessery oil for the cylinder is supplied by geared pump at minimum 30, maximum 87lt/mn pessure.

PUMP PREASSURE

200 bar.

OIL TANK

In one piece joined with fuel tank or seperated, body of made of gavenize sheet, out surface paintet in static dye resist darkening.

BAGGAGE

Smooth or space type.

YAN KAPAKLAR

3 mm kalınlıkda erdemir al kalite ya da sarıçam opsiyonludur. İlaveler 35 cm yükseklikte olup kolay açılıp kapanmasını için menteşelidir.

TABAN DÖŞEME

5 mm kalınlığında st 37 kalite erdemir sacı kullanılmaktadır.

BOYA

Yüzeyler boyamaya hazır hale getirilir. Şasiyi sert darbelere karşı koruyan özel 2 kat epoksi astar yapılır. Şasinin alt kısımları özel şasi ile boyanır, daha sonra istenilen "dyo 118 enamel" renge fırınlama sistemi ile boyanır.